Haier SC-278GA Manuel d'utilisateur Page 5

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 40
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 4
5. The height of inside shelves can be adjusted as you like.
6. The material of foam and refrigerant are R141b or C-P and R134a
separately, which can protect the environment effectively.
INSTALLATION
The cooler is supplied with a foam for safe transportation. Remove the
foam and place the cabinet in upright position and level it by means of the
adjustable screws at the base. Check with a spirit level.
Place the cabinet as described in the safety instruction.
When the cabinet is placed on carpet or on a wooden floor it may require
readjustment.
If you want to install your cooler into a gap between walls, take care of
the following;
1. There must be at least 15 cm free space above the cooler in order for
the cooling system to work satisfactorily.
2. Since the cooler takes up more room widthwise when the door is opened,
the door must either be placed free of the wall of there should be enough
space of at least 1.5 cm at the hinge side.
3. There must be sufficient room at the hinge side to clean and replace
the wire shelves.
ELECTRICAL CONNECTIONS
Your cooler operates on 220~240V/50Hz.
The plug must be earthed, Use a 10A fuse, The socket must be out of reach
of children , If the plug does not fit to the socket, use an adaptor.
If you need to replace the plugged cord, use earthed plug
The main electrical connections must be done by skilled electricians.
CAUTION FOR USING
1. The freezer must have its own power socket (250V,10A) and fuse socket
(5A) . The freezer must be connected safety with ground wire. The neutral
wire from electric power network should not be used as ground wire .The
fridge should not be plugged in the same socket with other appliances.
Otherwise it may cause firing.
3
1. Há som de refrigerente correndo no sistema quando funcionando o frigorífico.
Isso é normal.
2. O exterior do frigorífico é um pouco quente e o compressor faz possivelmente
tão calor que possa queimar a sua mão quando funcionando . Isso também é
normal.
3. Há condensação em cima do superfície quando colocado o frigórifico numa
área com alta humidade. Limpe-o com pano seco. Isso não é defeitivo.
4. Durante operação normal, o ventilador interior trabalha de acordo com estado
de funcionamento ou parada de compressor. Isso é normal.
Os fenómenos seguintes não são problemas
Problemas Gerais e os seus resoluções
RazõesProblemas Resoluções
O
compressor
não
funciona
A lâmpada verde
está ligada
O termostato não
funciona
Abrir termostato
A lâmpada
verde está
desligada
Tomada de alimentação
está bem ligada
Mudar fusível
A ficha não é
bem inserida
O
compressor
mente
trabalhando
Tomada de alimentação
não está ligada
A posição do botão de termostato
não está bem ajustada
Ajustar o termostato ao
sentido contrário de relógio
O frigorífico está muito perto do fonte de
calor ou diretamente exposto ao sol.
Mudar de lugar a colocar
O frigorífico está muito perto de
parede ou outro equipamento
Movimentar para longe o
frigórífico
Os demasiados alimentos conservam-se
por uma vez só no frigorífico.
Reduzir alimentos
conservados por cada vez
A porta está aberta muito frequentemente Reduzir vezes de abrir porta
O chão não está em nível Mudar de lugar a colocar
O frigorífico não está bem estavelmente
instalado.
Ajustar parafusos de
base ou pôr esteira
Circuito elétrico ou circuito de refrigeração
estão demasiadamente aproximados ou
compactos com o frigorífico.
Deixar separados
Muito
barulho
Inserir bem a ficha
O fusível está
rompido
8
Vue de la page 4
1 2 3 4 5 6 7 8 9 10 ... 39 40

Commentaires sur ces manuels

Pas de commentaire